Configure IP Allowlist for Databases

Amazon Web Services (AWS)

• Log in to the AWS Console
• Navigate to the resource that you would like Superblocks to connect to
• If you are applying an allowlist to an RDS instance, the instance must be set to Publicly accessible (this is found under Connectivity -> Additional configuration)

• Select an existing Security Group or create a new one
• Select the Inbound rules tab at the bottom and click Edit inbound rules

• Choose the port (defaults: Postgres: 5432, MySQL: 3306, MSSQL: 1433)
• Set Source to "Custom" and enter the following IP addresses:
  107.22.228.244/32, 3.93.101.124/32, 34.209.17.50/32, 34.227.169.51/32, 35.155.119.178/32, 35.171.116.214/32, 35.86.18.137/32, 44.232.244.93/32, 54.148.33.216/32

• Click Save rules

Google Cloud Platform (GCP)

Self hosted database

• Log in to the GCP Console
• Navigate to VPC Network -> Firewall
• Select an existing Firewall Rule or create a new one
• Set the following:
  • Direction of traffic: Ingress
  • Action on match: Allow
  • Targets: All instances on network
  • Source filter: IPv4 ranges
  • Source IPv4 ranges: Add the following IP addresses:
    107.22.228.244/32, 3.93.101.124/32, 34.209.17.50/32, 34.227.169.51/32, 35.155.119.178/32, 35.171.116.214/32, 35.86.18.137/32, 44.232.244.93/32, 54.148.33.216/32
  • Protocols and ports: Specified protocols and ports, TCP Ports (defaults: Postgres: 5432, MySQL: 3306, MSSQL: 1433)

• Click Create/Save

Cloud SQL

• Select a GCP SQL instance
• Navigate to Connections -> Networking
• In the Networking tab, make sure to add all IP addresses in the "Authorized Network" section found in the IP Allowlist by clicking "Add a Network"

• Click Done/Save